AHMR2 FFP IR MOA reticle is specifically designed for hunting and mid range application and the popular hunting caliber rifles with hold over points for both bullet drop compensation and wind holdover. The reticle is designed for you to zero your rifle a 100 yds center and use the bullet drop holdover up to 700 yds. The dots on horizontal lines below the center are specially designed for holding over for 5 mph and 10 mph wind. The ranging reticle down below is specially designed for ranging a deer body mass (from belly to the top of shoulder of a whitetail buck) from 200 yds to 600 yds. The illuminated center portion of the reticle provides great visibility during dusk and dawn low light conditions.
Subtensions in MOA: A1 (0.29); A2 (0.18); A3 (2); A4 (3); A5 (0.6); B1 (0.8); B2 (1.2); B3 (2); B4 (1.5); C1 (1.5); C2 (3.5); C3 (6.25); C4 (9.5); C5 (13.6); C6 (21.5); D1 (0.45); D2 (12)
AHMR2 FFP IR MIL
AHMR2 FFP IR MIL reticle is specifically designed for both hunting and shooting competitions. The 0.3 mil (1 moa) red dot is perfect for zeroing your rifle at 100 yards and the dots below the center red dot are for windage holdover with 0.5 mil increments. The elevation holdover drop line starts 1 mil below center all the way down to 8 mils with 0.5 mil hash marks in between. The center dot with 4 mil diameter circle provides quick aiming point at lower power and enough details for longer distance targets at higher power. The illumination of the reticle provides great visibility during low light conditions. The ranging reticle down below is specially designed for ranging a deer body mass (from belly to the top of shoulder of a whitetail buck) from 200 yds to 600 yds.
Application: Precision Short and Mid Range Shooting for both Tactical and Hunting